The cast iron platform is manufactured according to the standard of DIN876. The material is generally HT200--300, and there are also QT400-600 and ZG15-45.

1. In order to prevent the deformation of the cast iron plate, when hoisting the cast iron plate, use four wire ropes of the same length to hang the four lifting holes on the cast iron plate at the same time, and hoist the cast iron plate smoothly on the transport tool.

1.Material: The requirements for the material of cast iron platforms are also very important. The general material is HT200-3000, and the hardness is HB170-240. If the material reaches the standard hardness, it will naturally be the same abrasiveness.

Special casting, as a precision forming technology that realizes small and no allowance machining, will develop in the direction of precision, thin-wall, light-weight and energy-saving. Special casting mainly includes investment casting, die casting and low pressure casting.

1. There should be no rust, scratches, bumps and other appearance defects affecting the use of the working surface of the T-slot plate.

The use of the ground rail: according to the fixed point of the equipment, it is designed and spliced into a cast beam platform, which is mainly used for the assembly, test, welding and inspection of large equipment.